Question 1

How do I decide between selective, push back, drive-in, and pallet flow racking?

Accepted Answer

It comes down to SKU count, pallet depth per SKU, and how fast product turns. High SKU variety with frequent picks stays selective; a handful of SKUs with deep quantities gain far more storage density in push back, drive-in, or pallet flow. Send us your SKU profile and pallet counts and our design team will model two or three options side by side so you can compare pallet positions before you commit.

Question 2

What does your free warehouse design consultation actually include?

Accepted Answer

You get a CAD layout of your space with beam elevations, aisle widths, rack configurations, and a total pallet position count — at no cost and with no obligation. We work from your pallet dimensions, load weights, clear height, and forklift type, so the drawing reflects how your operation really runs. Most warehouse managers use it to justify the project internally before budget is approved.

Question 3

How much additional storage capacity can we realistically gain?

Accepted Answer

Most Detroit-area warehouses we redesign pick up 20–40% more pallet positions in the same footprint. The gains usually come from using clear height that is sitting empty, tightening aisle widths to match the lift equipment already on the floor, and moving slow-moving SKUs into denser storage. We will show you the before and after pallet counts so the number is not a guess.

Question 4

Can you design around our existing racking instead of replacing it?

Accepted Answer

Yes, and it is often the smarter spend. We identify the frames and beams worth keeping, match components where the profiles allow it, and design new industrial pallet racking to tie into what you already own. If mixing systems would compromise capacity, we will tell you that up front rather than sell you around it.

Question 5

What lead times should we plan for on a warehouse racking project?

Accepted Answer

Standard pallet rack components typically ship within days from stock, and most complete installations run one to four weeks from approved drawings depending on size and system type. Deeper systems like push back and pallet flow carry longer production windows. We give you a firm schedule with the quote so you can plan labor and inventory moves around it.

Question 6

How are rack capacities determined and documented for our team?

Accepted Answer

Capacity is set by beam length, beam profile, upright column, and frame spacing, and it is rated per pallet pair and per bay. Every completed system gets capacity tagging by row so your operators and safety team know the limits without checking a drawing. If your loads change later, call us and we will confirm what the existing frames can carry.

Question 7

We are adding automation and taller lifts. Will our layout still work?

Accepted Answer

Aisle width, upright spacing, and rail placement all change once you move to reach trucks, turret trucks, or conveyor-fed pick modules. We design layouts around the equipment you plan to run, not just what is on the floor today, so you are not tearing rows out in eighteen months. Bring us the equipment specs and we will build the layout to suit them.

Question 8

What kind of local support do we get after installation?

Accepted Answer

We are based in Detroit and our people are reachable directly — no call center queue. If you damage an upright, add a product line, or need a few extra bays to absorb a seasonal spike, we will get components moving and a crew scheduled quickly. That responsiveness for local operations is the part our customers mention most.

Question 9

How do you handle multi-building or multi-site rollouts?

Accepted Answer

We keep one point of contact across every building so specifications, component profiles, and capacity ratings stay consistent site to site. That means spare beams interchange, operators see the same setup everywhere, and future expansions do not require a new design from scratch. We coordinate delivery sequencing so each site receives material when its crew is ready.

Question 10

What information should we have ready to get an accurate quote fast?

Accepted Answer

Pallet dimensions and weight, number of pallet positions needed, clear height to the lowest obstruction, sprinkler and column locations if you have a floor plan, and your forklift type. With those five items we can usually return a layout and pricing within a couple of business days. If you do not have all of it, send what you have and we will work through the rest with you.

Industrial Pallet Racks & Warehouse Racking Solutions in Detroit, MI

Pallet Rack Systems for Every Warehouse Need

Selective Pallet Rack

Push Back Pallet Rack

Drive-In Pallet Rack

Pallet Flow Rack

Cantilever Rack

Carton Flow Rack

Complete Warehouse Storage Solutions

Free Warehouse Design

Space Optimization

Fast Delivery

Professional Installation

One Point of Contact

Since 1997

Common Warehouse Design Questions

Free Design Consultation Includes:

Recent Projects

Ready to Optimize Your Warehouse?

Serving the Greater Detroit Area

Frequently Asked Questions About Pallet Racks

Visit Our Detroit Location

Detroit Pallet Rack

Address

Phone

Business Hours

Start Your Warehouse Project Today